TELEGRAM

Thursday, January 26, 2012

LCD based voting machine using 8051 microcontroller (AT89C51)

Posted by Unknown at 9:50 PM 1 Comment
Electronic voting machine has now replaced the traditional mechanism of voting due to several advantages like security, automatic counting etc. This project presents a way to develop an electronic voting machine which displays the count of votes on a 16x2 LCD interface. A user can get his/her vote register through a set of switches (one for each candidate). After every cast of vote, the subsequent count can be seen on LCD. The circuit uses AT89C51 microcontroller and the code for the project has been written in C.

DESCRIBTION(click here)


  • This LCD based electronic voting machine is designed for four candidates. The input part consists of a set of six tactile switches. The switches and 16x2 LCD are interfaced to microcontroller AT89C51 for various operations and displays.
    The provision of casting votes for the candidates has been provided through four of these switches. These switches are made active high and connected to pins 2-5 (P1^1 – P1^4) of the controller. The remaining two switches (both active low) are to start and stop the voting procedure. They are connected to pins 1 and 6 (P1^0 and P1^5) respectively. The Init (start) switch initializes the voting system when pressed, while the Stop switch ends the voting and displays the poll results on LCD screen.
    For more details on working with LCD, refer LCD interfacing with 8051. The data pins of the LCD (pins 7-14) are connected to the output port P2 of the microcontroller. The control pins (RS, R/W and EN) are connected to port P3 pins P3^0, P3^1 & P3^6 respectively.
    Working:
    The voting is started by pressing the Init switch after which the user is prompted to vote. The count of votes is stored in four different variables. As soon as the user votes for a candidate by pressing one of the switches, the value of the corresponding variable is increased by one. After this a Thank you message is displayed on LCD to acknowledge the registration of user’s vote.
    The message stays on the screen until the next user either presses the Init button to cast another vote or Stop switch is pressed get the poll results. When the stop button is pressed, the names of the candidates are displayed along with their vote counts. After some delay, the result is displayed which could be either declaration of the winner candidate or the candidates with a clash of their number of votes.
CODE(click here)
  • 
    // Program to make a voting machine using LCD
    
    
    
    #include<reg51.h>
    
    #define msec 50
    
    #define lcd_data_str_pin P2 
    
    sbit rs = P3^0;  //Register select (RS) pin
    
    sbit rw = P3^1;  //Read write(RW) pin
    
    sbit en = P3^6;  //Enable(EN) pin
    
    sbit ini_pin = P1^0; // Start voting pin
    
    sbit stop_pin = P1^5; // Stop voting pin
    
    
    
    sbit candidate_1=P1^1;  //Candidate1
    
    sbit candidate_2=P1^2;  //Candidate2
    
    sbit candidate_3=P1^3;  //Candidate3
    
    sbit candidate_4=P1^4;  //Candidate4
    
    int max = 0;
    
    int carry = 0;
    
    int arr[4];
    
    
    
    int vote_amt[3],j;
    
    unsigned int vote_1,vote_2,vote_3,vote_4;
    
    
    
    void delay(int delay_time)  // Time delay function
    
    {
    
    int j,k;
    
    for(j=0;j<=delay_time;j++)
    
      for(k=0;k<=1000;k++);
    
    }
    
    
    
    void lcd_cmd(unsigned char cmd_addr)  //Function to send command to LCD
    
    {
    
    lcd_data_str_pin = cmd_addr;
    
    en = 1;
    
    rs = 0;
    
    rw = 0;
    
    delay(1);
    
    en = 0;
    
    return;
    
    }
    
    
    
    void lcd_data_str(char str[50])  //Function to send string
    
    { 
    
    int p;
    
    for (p=0;str[p]!='\0';p++)
    
    {
    
      lcd_data_str_pin = str[p];
    
      rw = 0;
    
      rs = 1;
    
      en = 1;
    
      delay(1);
    
      en = 0;
    
    }
    
    return;
    
    }
    
    
    
    void lcd_data_int(unsigned int vote)  //Function to send 0-9 character values
    
    { 
    
    char dig_ctrl_var;
    
    int p;
    
    for (j=2;j>=0;j--)
    
    {
    
      vote_amt[j]=vote%10;
    
      vote=vote/10;
    
    }
    
    
    
    for (p=0;p<=2;p++)
    
    {
    
      dig_ctrl_var = vote_amt[p]+48;
    
      lcd_data_str_pin = dig_ctrl_var;
    
      rw = 0;
    
      rs = 1;
    
      en = 1;
    
      delay(1);
    
      en = 0;
    
    }
    
    return;
    
    } 
    
    
    
    void vote_count()  // Function to count votes
    
    {
    
    while (candidate_1==0 && candidate_2==0 && candidate_3==0 && candidate_4==0);
    
    if (candidate_1==1)
    
    {
    
      while (candidate_1 == 1);
    
       {
    
        vote_1 = vote_1 + 1;
    
       }
    
    }
    
    
    
    if (candidate_2==1)
    
    {
    
      while (candidate_2 == 1);
    
       {
    
        vote_2 = vote_2 + 1;
    
       }
    
    }
    
    
    
    if (candidate_3==1)
    
    {
    
      while (candidate_3 == 1);
    
       {
    
        vote_3 = vote_3 + 1;
    
       }
    
    }
    
    
    
    if (candidate_4==1)
    
    {
    
      while (candidate_4 == 1);
    
       {
    
        vote_4 = vote_4 + 1;
    
       }
    
    }
    
    }
    
    
    
    void lcd_ini()
    
    {
    
        lcd_cmd(0x38);
    
    delay(msec);
    
    lcd_cmd(0x0E);
    
    delay(msec);
    
    lcd_cmd(0x01);
    
    delay(msec);
    
    lcd_cmd(0x81);
    
    delay(msec);
    
    lcd_data_str("Welcome!!!");
    
    delay(100);
    
    lcd_cmd(0x01);
    
    delay(msec);
    
    lcd_cmd(0x80);
    
    delay(msec);
    
    lcd_data_str( "Press" );
    
    delay(msec);
    
    lcd_cmd(0x14);
    
    delay(msec);
    
    lcd_data_str("button");
    
    delay(msec);
    
    
    
    delay(msec);
    
    lcd_cmd(0xC0);
    
    delay(msec);
    
    lcd_data_str("to");
    
    delay(msec);
    
    lcd_cmd(0x14);
    
    delay(msec);
    
    lcd_data_str("vote");
    
    delay(100);
    
    lcd_cmd(0x01);
    
    delay(msec);
    
    lcd_cmd(0x80);
    
    delay(msec);
    
    lcd_data_str("P1");
    
    delay(msec);
    
    lcd_cmd(0x84);
    
    delay(msec);
    
    lcd_data_str("P2");
    
    delay(msec);
    
    lcd_cmd(0x88);
    
    delay(msec);
    
    lcd_data_str("P3");
    
    delay(msec);
    
    lcd_cmd(0x8C);
    
    delay(msec);
    
    lcd_data_str("P4");
    
    delay(msec);
    
    
    
    vote_count();
    
    lcd_cmd(0x01);
    
    delay(msec);
    
    lcd_cmd(0x85);
    
    delay(msec);
    
    lcd_data_str("Thank");
    
    delay(msec);
    
    lcd_cmd(0x14);
    
    delay(msec);
    
    lcd_data_str("You!!");
    
    delay(100);
    
    }
    
    
    
    void results()  // Function to show results
    
    {
    
    int i;
    
    carry = 0;
    
    lcd_cmd(0x01);
    
    delay(msec);
    
    lcd_cmd(0x80);
    
    delay(msec);
    
    lcd_data_str("Results");
    
    delay(msec);
    
    lcd_cmd(0x14);
    
    delay(msec);
    
    lcd_data_str("Are");
    
    delay(msec);
    
    lcd_cmd(0x14);
    
    delay(msec);
    
    lcd_data_str("Out");
    
    delay(msec);
    
    
    
      lcd_cmd(0x01);
    
    delay(msec);
    
    lcd_cmd(0x80);
    
    delay(msec);
    
    lcd_data_str("P1");
    
    delay(msec);
    
    lcd_cmd(0x84);
    
    delay(msec);
    
    lcd_data_str("P2");
    
    delay(msec);
    
    lcd_cmd(0x88);
    
    delay(msec);
    
    lcd_data_str("P3");
    
    delay(msec);
    
    lcd_cmd(0x8C);
    
    delay(msec);
    
    lcd_data_str("P4");
    
    delay(msec);
    
    
    
    lcd_cmd(0xC0);
    
    delay(100);
    
    lcd_data_int(vote_1);
    
    delay(msec);
    
    
    
    lcd_cmd(0xC4);
    
    delay(msec);
    
    lcd_data_int(vote_2);
    
    delay(msec);
    
    
    
    lcd_cmd(0xC8);
    
    delay(msec);
    
    lcd_data_int(vote_3);
    
    delay(msec);
    
    
    
    lcd_cmd(0xCC);
    
    delay(msec);
    
    lcd_data_int(vote_4);
    
    delay(300);
    
    
    
    arr[0] = vote_1;
    
    arr[1] = vote_2;
    
    arr[2] = vote_3;
    
    arr[3] = vote_4;
    
    
    
    for( i=0; i<4; i++)
    
    {
    
      if(arr[i]>=max)
    
      max = arr[i];
    
    }
    
    
    
    if ( (vote_1 == max) && ( vote_2 != max) && (vote_3 != max)&& (vote_4 != max) )
    
    {
    
      carry = 1;
    
      lcd_cmd(0x01);
    
      delay(msec);
    
      lcd_cmd(0x82);
    
      delay(msec);
    
      lcd_data_str("Hurray!!!");
    
      delay(50);
    
      lcd_cmd(0xC4);
    
      delay(msec);
    
      lcd_data_str("P1");
    
      delay(msec);
    
      lcd_cmd(0x14);
    
      delay(msec);
    
      lcd_data_str("wins");
    
      delay(msec);
    
    }
    
    
    
    if ( (vote_2 == max) && ( vote_1 != max) && (vote_3 != max)&& (vote_4 != max) )
    
    {
    
      carry = 1;
    
      lcd_cmd(0x01);
    
      delay(msec);
    
      lcd_cmd(0x82);
    
      delay(msec);
    
      lcd_data_str("Hurray!!!");
    
      delay(50);
    
      lcd_cmd(0xC4);
    
      delay(msec);
    
      lcd_data_str("P2");
    
      delay(msec);
    
      lcd_cmd(0x14);
    
      delay(msec);
    
      lcd_data_str("wins");
    
      delay(msec);
    
    }
    
    
    
    if ( (vote_3 == max) && ( vote_2 != max) && (vote_1 != max)&& (vote_4 != max) )
    
    {
    
      carry = 1;
    
      lcd_cmd(0x01);
    
      delay(msec);
    
      lcd_cmd(0x82);
    
      delay(msec);
    
      lcd_data_str("Hurray!!!");
    
      delay(50);
    
      lcd_cmd(0xC4);
    
      delay(msec);
    
      lcd_data_str("P3");
    
      delay(msec);
    
      lcd_cmd(0x14);
    
      delay(msec);
    
      lcd_data_str("wins");
    
      delay(msec);
    
    }
    
    
    
    if ( (vote_4 == max) && ( vote_2 != max) && (vote_3 != max)&& (vote_1 != max) )
    
    {
    
      carry = 1;
    
      lcd_cmd(0x01);
    
      delay(msec);
    
      lcd_cmd(0x82);
    
      delay(msec);
    
      lcd_data_str("Hurray!!!");
    
      delay(50);
    
      lcd_cmd(0xC4);
    
      delay(msec);
    
      lcd_data_str("P4");
    
      delay(msec);
    
      lcd_cmd(0x14);
    
      delay(msec);
    
      lcd_data_str("wins");
    
      delay(msec);
    
    }
    
    
    
    if (carry==0)
    
    {
    
      lcd_cmd(0x01);
    
      delay(msec);
    
      lcd_cmd(0x82);
    
      delay(msec);
    
      lcd_data_str("clash");
    
      delay(50);
    
      lcd_cmd(0x14);
    
      delay(msec);
    
      lcd_data_str("between!!!");
    
      delay(50);
    
      if(vote_2 == max)
    
      {
    
       lcd_cmd(0xC5);
    
       lcd_data_str("P2");
    
       delay(50);
    
      }
    
      if(vote_3 == max)
    
      {
    
       lcd_cmd(0xC9);
    
       lcd_data_str("P3");
    
       delay(50);
    
      }
    
      if(vote_4 == max)
    
      {
    
       lcd_cmd(0xCD);
    
       lcd_data_str("P4");
    
       delay(50);
    
      }
    
    }
    
    }
    
    
    
    void main()
    
    {
    
    ini_pin = stop_pin = 1;
    
    vote_1 = vote_2 = vote_3 = vote_4 = 0;
    
    candidate_1 = candidate_2 = candidate_3 = candidate_4 = 0;
    
    lcd_cmd(0x38);
    
    delay(msec);
    
    lcd_cmd(0x0E);
    
    delay(msec);
    
    lcd_cmd(0x01);
    
    delay(msec);
    
    lcd_cmd(0x80);
    
    delay(msec);
    
    lcd_data_str( "Press" );
    
    delay(msec);
    
    lcd_cmd(0x14);
    
    delay(msec);
    
    lcd_data_str("init");
    
    delay(msec);
    
    
    
    delay(msec);
    
    lcd_cmd(0xC0);
    
    delay(msec);
    
    lcd_data_str("to");
    
    delay(msec);
    
    lcd_cmd(0x14);
    
    delay(msec);
    
    lcd_data_str("begin");
    
    delay(100);
    
    while(1)
    
    {
    
      while(ini_pin != 0)
    
      {
    
       if (stop_pin == 0)
    
       break;
    
      }
    
      if (stop_pin == 0)
    
      {
    
      break;
    
      }
    
      lcd_ini();
    
    }
    
    
    
    while(1)
    
    {
    
    results();
    
    }
    
    }
    
    
COMPONENTS(click here)
  • AT89C51 Microcontroller
  • Preset
  • LCD
Tags:

Share This Post

Get Updates

Subscribe to our Mailing List. We'll never share your Email address.

1 comment:

  1. I can not see your scematic, code and video.
    my be you hiper link is broken

    ReplyDelete

THANKS FOR UR COMMENT ....

Categories

Labels

AERONAUTICAL AEROSPACE AGRICULTURE ANDROID Android project titles Animation projects Artificial Intelligence AUTOMOBILE BANK JOBS BANK RECRUITMENTS BIG DATA PROJECT TITLES Bio instrumentation Project titles BIO signal Project titles BIO-TECHNOLOGY BIOINFORMATICS BIOMEDICAL Biometrics projects CAREER CAT 2014 Questions CHEMICAL CIVIL Civil projects cloud computing COMP- PROJ-DOWN COMPUTER SCIENCE PROJECT DOWNLOADS COMPUTER(CSE) CONFERENCE Data mining Projects Data protection. Design projects DIGITAL SIGNAL PROCESSING IEEE Project titles Dot net projects EBOOKS ELECTRICAL MINI PROJECTS ELECTRICAL PROJECTS DOWNLOADS ELECTRONICS MINI PROJECTS ELECTRONICS PROJECT DOWNLOADS EMG PROJECTS employment Engineering projects Exams Facts final year projects FOOD TECHNOLOGY FREE IEEE 2014 project Free IEEE Paper FREE IEEE PROJECTS GATE GAte scorecard GOVT JOBS Green projects GSM BASED Guest authors HIGHWAY IEEE 2014 projects ieee 2015 projects IEEE computer science projects IEEE Paper IEEE PAPER 2015 ieee project titles IEEE projects IEEE Transactions INDUSTRIAL INNOVATIVE PROJECTS INTERFACING IT IT LIST Java projects labview projects LATEST TECHNOLOGY list of project centers Low cost projects m.com MARINE Matlab codes MATLAB PROJECT TITLES MATLAB PROJECTS MBA MBA 2015 projects MCA MECHANICAL MECHANICAL PROJECTS DOWNLOAD MINI PROJECTS modelling projects MP3 MP3 cutter Mp4 Networking topics ns2 projects online jobs PETROCHEMICAL PHYSIOLOGICAL MODELLING projects physiotheraphy Projects Power electronics power system projects PRODUCTION project centers project downloads Prosthesis projects RAILWAY RECRUITMENT 2012 Recent RECENT TECHNOLOGY RECENT TECHNOLOGY LIST RECRUITMENT Rehabilitation projects renewable power respiration projects RESUME FORMAT. Ring Tone Cutter Robotics projects. Robots in medical social network jobs Solar projects Songs Cutter Speech-music separation-Abstract structural engineering TECHNOLOGY technology management TELE COMMUNICATION Telegram project TEXTILE TOP ENGINEERING COLLEGES Training VLSI

Disclaimer

This blogs is an effort to club the scattered information about engineering and project titles and ideas available in the web. While every effort is made to ensure the accuracy of the information on this site, no liability is accepted for any consequences of using it. Most of the material and information are taken from other blogs and site with the help of search engines. If any posts here are hitting the copyrights of any publishers, kindly mail the details to educations360@gmail.com It will be removed immediately.

Alexa Rank

back to top